AEO-7 vs AEO-9 for Metal Degreasing: A Supplier Trial Guide
Plan an AEO-7 vs AEO-9 metal-degreasing trial with defined controls, separate cleaning and metal checks, and a record for exact-grade supplier review.
blogs
blogs
How to Choose Between PPG 400, PPG 1000 and PPG 2000
Compare PPG 400, 1000 and 2000 by functionality, hydroxyl value, viscosity test conditions and documents. Plan your grade review and controlled trial.
blogs
L61 vs L62 vs L63 vs L64: EO/PO Block Polyether Selection Guide
Compare L61, L62, L63 and L64 EO/PO block polyethers by grade identity, test conditions and formulation needs. Use the checklist to request TDS, SDS and batch COA.
How to Select Surfactants for Wax and Silicone Emulsions
Industrial Emulsion Selection Guide How to Select Surfactants for Wax and Silicone Emulsions Wax and silicone may both be dispersed
Agricultural Spray Adjuvants: Tank-Mix Wetting & Foliar Penetration
Tank-Mix Selection Guide How to Select a Tank-Mix Adjuvant for Wetting and Penetration Select an agricultural spray adjuvant against a
Surfactants for Emulsion Polymerization: Latex, Adhesives & Coating Binders
Latex Formulation Guide How to Select Surfactants for Latex Emulsion Polymerization A stable pre-emulsion does not prove that a surfactant
blogs
KEMAIX-103 Non-Silicone Polyether Antifoam for Fermentation
KEMAIX-103 is a non-silicone polyether antifoam supplied for industrial fermentation and bioprocess trials, with a documented 100-1,000 ppm screening range.
How to Select a Polyether Defoamer for Wastewater Treatment
Diagnose wastewater foam, compare polyether, silicone and mineral-oil defoamers, and build a controlled bench test before plant scale-up with Kemaix.
Poloxamer 188 (F68) in Bioprocessing: Shear Protection or Foam Control?
How Poloxamer 188 (F68) protects cells from shear in bioprocessing, how it differs from low-HLB polyether antifoams, and why lot qualification matters.
Cloud Point of Nonionic Surfactants: Meaning, Test Basis and Grade Selection
Learn what the cloud point of ethoxylated nonionic surfactants means, how EO content and electrolytes affect it, and how to select AEO and EL grades by process temperature.